Bottle holder 925 sterling silver filigree — approx. 25 cm, neck ring

Most bottle holders do one thing: hold. This one does two things at once – at the bottom, the bottle stands in an openwork basket, while at the top, a single, widely curved hoop leads to a ring that grips the neck. It's the design of the plain neck-ring holder, but here with a wall that you can see through.

At a glance

• Bottle holder made of 925 sterling silver
• Height approx. 25 cm – silver weight approx. 150 g
• Low basket with openwork tendril lattice, profiled base ring
• Side S-hoop with closed neck ring at the top
• Zaramella Argenti, Padua – Manufacture since 1948

Two techniques in one piece

The basket and hoop are created in completely different ways. The basket is sawn à jour – each opening in the tendril pattern is cut out individually, each edge reworked. The hoop, on the other hand, is drawn and bent from a solid silver rod; it must not have any kinks and must not waver along its entire length.

The fact that both come together in one piece is unusual. The openwork wall appears light, the hoop provides a clear line in contrast – you can tell by looking at the holder that two different techniques were used to craft it.

The lattice

The catalog soberly refers to the pattern as Perforated Grid. What you actually see is a tendril work of interlocking arches, where the openings are not punched holes, but the spaces between the ornament. The difference is not a linguistic one: a punched hole has a smooth edge, a sawn opening has a reworked one. You recognize it faster with your finger than with your eye.

Why a neck ring

A bottle that only stands at the bottom can tip over. The ring at neck height prevents that – and it helps when putting it back: if you put the bottle down after pouring, you hit the ring even without looking. With a heavy bottle on a full table, that's worth more than it sounds.

Material

Two components, two requirements: the hoop must spring without breaking; the basket must be able to be sawn out without tearing. Only solid silver can do both. A plating on a base metal flakes off at the saw cuts and fatigues at the bend.

What it fits

For wine and sparkling wine bottles of standard design. Among the holders with a neck ring, this is the most affordable – and the only one with an ornament.

Without any pattern, but with a mirrored wall, there is the plain neck-ring holder of the same height. If you don't want to fix the bottle, but just place it, you'll find the same tendril pattern without a hoop on the openwork coaster.

What goes with it

For opening, the manufacturer offers the Inglese bottle opener, and for chilling, the Inglese champagne cooler. Carafes and pitchers for pouring are available in their own category.

As a gift

This is the entry point to holders with neck rings – the design that guests notice because it is unusual. If you want to give someone something made of silver that is not immediately recognized as a coaster, this is the right choice.

An engraving is possible on the base ring; we advise beforehand on placement and size. On request, we can include a SilberVerse card, 15 × 10 cm, free of charge.

Care

Wash by hand with warm water, mild dish soap, and a soft cloth, then dry thoroughly. Do not use a dishwasher. The tendril lattice can be reached with a soft brush; wipe the hoop in straight lines, do not circularize. More in the guide on the care of silver cutlery and silver dinnerware.

Frequently Asked Questions

Does every bottle fit through the neck ring?

Standard wine and sparkling wine bottles yes. Bottles with very wide necks or swing tops may not fit.

Is the hoop sturdy enough?

Yes – it doesn't bear weight, it guides. The weight of the bottle rests in the basket.

Solid or silver-plated?

The piece is made of solid 925 sterling silver and is hallmarked. We do not carry silver-plated goods.

Is this design also available without an ornament?

Yes – as a plain holder with a neck ring, same height, mirrored wall.

Is it delivered in gift packaging?

Yes, in high-quality packaging from the manufacturer.

You might also be interested in

Further pieces for wine and table in the category Gifts for Wine Lovers as well as in Table Silverware.